ASME A17.1/CSA B44, Safety Code for Elevators and Escalators, and ASME A17.7/CSA B44.7, Performance- Based Safety Code for Elevators and Escalators, are the accepted guides for design, construction, installation, operation, inspection, testing, maintenance, alteration,
and repair of elevators, dumbwaiters, escalators, moving walks, and material lifts. They are the basis in total or in part for elevator codes used throughout the United States and Canada.
ASME A17.1/CSA B44 and ASME A17.7/CSA B44.7 are only guides unless adopted as law or regulation by an authority having jurisdiction. Local jurisdictions may, in their adopting legislation, occasionally revise and/or include requirements in addition to those found in ASME A17.1/CSA B44 and ASME A17.7/CSA B44.7. It is therefore advisable to check with the local jurisdiction before applying code requirements in any area.
Requirement 1.1.1(c) was revised in ASME A17.1- 2013/CSA B44-13 to clarify that devices with hoisting and lowering mechanisms equipped with a car serving two or more landings and restricted to the carrying of materials but not classified as a dumbwaiter or material lift are not covered by the Code.
Requirement 1.1.2 outlines examples of equipment not covered by ASME A17.1/CSA B44 and ASME A17.7/CSA B44.7. Requirement 1.1.3 specifies those Parts and requirements of the Code that apply only to new installations, as well as those that apply to both new and existing installations. Requirement 1.1.3 was revised in ASME A17.1-2019/CSA B44:19 to include Section 8.12 because the International Building Code requires existing buildings to comply with ASCE 24 under certain conditions that would in turn affect new and existing elevators installed in an existing building.
Product Details
- Published:
- 2021
- ANSI:
- ANSI Approved
- Number of Pages:
- 785
- File Size:
- 1 file , 30 MB
- Note:
- This product is unavailable in Belarus, Russia, Ukraine