Category: SAE

NOx Tracking Parameter Accuracy
standard by SAE International, 10/19/2021

BOLT, MACHINE ¿¿¿ DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, UNS S66286, SILVER PLATED, .5625-18UNJF-3A
standard by SAE International, 10/26/2021

Low Water Tolerant Brake Fluids
standard by SAE International, 05/28/2021

Steel, Corrosion Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr – 4.5Ni – 0.30Cb (Nb) – 3.5Cu Consumable Electrode Remelted Solution Heat Treated, Precipitation Hardenable
standard by SAE International, 10/01/2021

BOLT, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A
standard by SAE International, 10/28/2021

BEARING, ROLLER, NEEDLE, TRACK ROLLER INTEGRAL STUD, SEALED, TYPE VIII ANTIFRICTION, INCH
standard by SAE International, 10/06/2021

Wrench, Spanner
standard by SAE International, 07/28/2021

Webbing Service Life for Occupant Restraints
standard by SAE International, 10/01/2021

Defining and Measuring Factors Affecting Helicopter Turbine Engine Power Available
standard by SAE International, 10/01/2021

Laboratory Viscosity Measurement of Thickened Aircraft Deicing/Anti-icing Fluids with a Viscometer
standard by SAE International, 07/23/2021

SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
standard by SAE International, 05/12/2021

Data Formats and Practices for Life Cycle Cost Information (Stabilized: Sep 2021)
standard by SAE International, 09/10/2021