Standards Library

Handbook of Hydraulic Metric Calculations
standard by SAE International, 05/18/2021

Engine Electronic Unit Fire and Overheat Design Guide
standard by SAE International, 06/10/2021

Method of Measurement of Performance Characteristics of Hearing Aids Under Simulated Real-Ear Working Conditions
standard by American National Standards of the Acoustical Society of America, 11/08/2021

Polishing Compound, Aircraft Metal
standard by SAE International, 05/06/2021

Tolerances Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes
standard by SAE International, 09/14/2021

Aluminum Alloy, Sheet and Plate 4.0Cu – 1.0Li – 0.40Mg – 0.35Ag – 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially Aged
standard by SAE International, 09/13/2021

Aircraft Tail Bumpers (Stabilized: Jun 2021)
standard by SAE International, 06/22/2021

Aluminum Alloy, Plate 4.0Zn – 2.0Mg – 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved, and Artificially Aged
standard by SAE International, 05/18/2021

Iron-Nickel Alloy, Strip 49Fe – 5.3Cr – 42Ni – 2.5Ti – 0.55Al Solution Heat Treated, Cold Rolled, 50% Reduction
standard by SAE International, 06/01/2021

Aluminum Alloy Extrusions 8.9Zn – 2.2Cu – 2.2Mg – 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
standard by SAE International, 09/15/2021

Rubber: Ethylene Propylene (EP) Phosphate Ester Resistant Low Temperature -75 ¿¿F (-59 ¿¿C), 75 to 85 Type M Hardness For Seals in Hydraulic Systems
standard by SAE International, 07/23/2021

Aluminum Bronze Bars, Rods, and Forgings 87Cu – 9Al – 3Fe Stress Relieved
standard by SAE International, 07/07/2021