Category: SAE

General Gland Design Criteria for Static and Dynamic O-Ring Seal Applications Specifically for Engines and Engine Control Systems
standard by SAE International, 01/14/2022

BOLT, MACHINE – HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
standard by SAE International, 12/01/2021

Steel, Corrosion Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr – 4.0Ni – 0.30Cb (Nb) – 4.0Cu Solution and Precipitation Heat Treated (H1150)
standard by SAE International, 01/20/2022

Data Dictionary for Quantities Used in Cyber Physical Systems (Enhanced License)
standard by SAE International, 12/15/2021

Electromagnetic Compatibility Measurement Procedure for Vehicle Components – Immunity to AC Power Line Electric Fields
standard by SAE International, 12/13/2021

BOLT, MACHINE – HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
standard by SAE International, 02/23/2022

CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
standard by SAE International, 01/28/2022

Aluminum Alloy, Extruded Round Rod 3.5Cu – 1.0Li – 0.40Mg – 0.45Ag – 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved by Stretching, and Artificially Aged
standard by SAE International, 04/22/2022

On-Board System Requirements for LTE-V2X V2V Safety Communications
standard by SAE International, 03/21/2022

Physical Layer, 500 kbit/s
standard by SAE International, 04/05/2022

Automated Vehicles and Infrastructure Enablers
Report / Survey by SAE International, 03/18/2022

Elastomer: Rubber, Silicone (MQ/VMQ/PVMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity 50 ¿¿¿ 60 Durometer Type A Hardness for Products in Pressurized Aircraft Compartment Interiors
standard by SAE International, 03/29/2022