Category: SAE

Sponge, Fluorosilicone (FVM) Rubber Closed Cell (Stabilized: Aug 2021)
standard by SAE International, 08/12/2021

Gland Design, O-Ring and Other Seals
standard by SAE International, 11/09/2021

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Forging Stock 19Cr – 9.5Ni Solution Heat Treated
standard by SAE International, 08/12/2021

Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
standard by SAE International, 08/03/2021

Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Forging and Ring Stock, Mechanical Tubing, and Rings 12Cr Ferrite Controlled, Annealed, Consumable Electrode Melted
standard by SAE International, 07/19/2021

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni – 25.5Cr – 3.2Co – 3.2Mo – 3.2W – 18.5Fe Solution Heat Treated
standard by SAE International, 09/21/2021

TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE III, CLASS 1, FOR 105 ¿¿C TOTAL CONDUCTOR TEMPERATURE (Stabilized: Aug 2021)
standard by SAE International, 08/26/2021

Transmission Oil Cooler Hose (Stabilized: Jun 2021)
standard by SAE International, 06/10/2021

HIGH CONFORMANCE SEAL, TYPE I AND II STANDARD AND LOW PROFILE
standard by SAE International, 06/22/2021

Aircraft Engine Life Cycle Cost Guide (Stabilized: Sep 2021)
standard by SAE International, 09/10/2021

Aerospace ¿¿¿ Customer Identified Major Quality Management System Nonconformity Other Party Collaborative Corrective Action Process
standard by SAE International, 10/18/2021

Aerospace Cable, Fiber Optic (Stabilized: Sep 2021)
standard by SAE International, 09/21/2021